Products Description of 40mm tube Mini Tube Furnace
This is a small-sized device designed for limited laboratory space, which is convenient to carry and reduces the use of space. At the same time, it can also meet various atmosphere reduction and powder metallurgy granular experiments. The furnace tube adopts quartz tube, and the transparent tube can facilitate the observation of the sintering situation of the material inside the tube, making it easy to clean. The furnace can be opened for easy installation of furnace tubes and rapid cooling, achieving the desired cooling time.
Products Features of 40mm tube Mini Tube Furnace
1.1200C maximum, 1100C continuous working temperature.
2.High temperature zone design, tube diameter OD40mm, heating zone 205mm
3.Open chamber design, convenient for observing materials and placing tube
4.30-stage temperature-time control program, accuracy ±1℃, touch screen optional
5.Voltmeter and ammeter included, easy to troubleshoot
6.Table design, easy to place material
7.Can be filled with inert atmosphere, can be vacuumed
Details of chamber-movable furnace
Standard packaging accessories
Standard parts in package.
Vacuum pump
The vacuum upto -0.1Mpa.
Samll furnace chamber
The compact and lightweight appearance is the best choice for small experiments.
Furnace body bracket
Desk design with Ergonomics,material storage with convenience,wheels easy to move with brake function.
Products Specifications of Sliding tube furnace SK2 series
| Temperature | Max 1200℃,continious working 1100℃ |
| Heating zone | OD40mm,zone length 205mm or customized available |
| Heating rate | ≤30℃/minute(if Halogen tube then 300℃/min) |
| Heating element | HRE resistance wire(Halogen tube available) |
| Chamber | 1430℃ grade Alumina ceramic firber refractory chamber |
| Temperature controller | Yudian temperature controller,PID control,30segments temperature-time programs;±1℃ accuracy;over heating protection,broken thermocouple alarm,indepent control(touch screen version optional) |
| Furnace Sliding | Support(manually and electronic optional) |
| Tube material | High purity Quartz |
| Power | Based on heating zone selection+temperature,voltage/phase can be totally as per client's local facility environment |
| Wheels | Included |
| Atmosphere filled in | Support |
| Vacuum pump | Optional |
| Max vacuum | -0.1Mpa or as per client's indication |
| Warranty | 1years warranty with lifetime support(excluding consumable accessories) |
| Certification | CE,ISO9001:2015,SGS |
Warm tips of chamber-movable furnace
1. The air pressure in the furnace tube shall not be higher than 0.02MPa
2. Since the internal air pressure of the gas cylinder is high, the pressure reducing valve must be installed on the gas cylinder when the gas is fed into the furnace tube. To ensure safety, it is recommended to use a pressure lower than 0.02MPa
3. When the furnace body temperature is higher than 1000 ℃, the furnace tube shall not be in a vacuum state, and the pressure in the furnace tube shall be equivalent to the atmospheric pressure
4. The gas flow into the furnace tube shall be less than 200SCCM to avoid the impact of cold air flow on the hot furnace tube
5. For the sample heating experiment, it is not recommended to close the air extraction valve and air inlet valve at the flange end of the furnace tube. If it is necessary to close the gas valve to heat the sample, pay attention to the indication of the pressure gauge at all times. If the air pressure indication is greater than 0.02MPa, the exhaust valve must be opened immediately to prevent accidents (such as furnace tube rupture, flange flying out, etc.)
Certifications
CE&ISO9001:2015
CE
CE
CE
ISO
ISO
CE
The below are our email and phone numbers. You can log in to our website(www.nyxinyu.com) to find the products you need. Please send us an email with your detailed requirements.
Our address
G2-1 Floor,Comprehensive Bonded zone,Wolong Area, NanYang City, HeNan Province,China.
Phone Number
86 (377)-6353-3899
sales@nyxinyu.com
FAQ
01.Are you Glass tube furnace manufacturer?
02. What kind terms of payment can be accepted?
03.Can l ask for customized furnace?
04.What about the delivery time?
05.What about the guarantee period?
06.What about the Minimum Order Quantity?
Hot Tags: 40mm tube mini tube furnace, China 40mm tube mini tube furnace manufacturers, suppliers
