Products Description
Debinding and sintering furnace is mainly designed for the integrated degreasing and pre-sintering process of fine ceramic components such as aluminum nitride, silicon nitride substrates, alumina, zirconium oxide, dielectric ceramics, etc. It can also be used for ceramic powder materials, solid-state fuel cells SOFC, LTCC, MLCC, NTC, NFC, ceramic cores and other electronic components for debinding, pre-burning and firing and powder decarbonization.
The thermal material of Debinding and sintering furnace is made of high-quality energy-saving imported foam bricks. The heating element is heated by high-quality resistance wire wound spirally through a corundum tube, and the heating tube is arranged on five sides. The control instrument uses the European program controller imported from the UK. The equipment has the advantages of stable temperature control, superior performance, low energy consumption, and clean furnace, which is very suitable for medium and small batch production and scientific research in enterprises.
Features of Debinding and sintering furnace
1. High-quality resistance wire is wound spirally through corundum tube for heating, heating tubes are arranged on five sides, and a preheating system is used outside the furnace.
2. Dual-system thermal field control method: low temperature is circulated through hot air of the preheating system, and high temperature is heated and radiated through five sides in the furnace.
3. The control instrument uses the European instrument imported from the UK, and the equipment has high temperature control accuracy.
4. Equipped with tail gas treatment cracking and purification device, the tail gas emission in the degreasing process is more environmentally friendly.
5. The volume of the equipment can be selected according to requirements, from experimental small batch production to large-scale production.
Technical parameters
Debinding and sintering furnace
| Model | SD2-11TP125L |
| Max.design(℃) | 1100 |
|
Internal dimensions: D x W x H (mm) |
500*500*500MM or customized |
| Power(KW) | 28 |
| Voltage(V) | 380V 3相 |
| Volume (litres) | 125 |
| Thermocouple type | K |
| Heating rate | 0-20C/min |
| Temp.Precision | ±1℃ |
| Furnace structure | Double-layer air-cooled structure, surface temperature is less than 60℃ |
| Furnace chamber material | It is built with refractory bricks, which have a longer service life and higher furnace cleanliness than ceramic fiber materials. |
| Heating method | Five-sided heating, using high-quality resistance wire, spirally wound with corundum tube inside, non-uniform distribution design through the refractory brick reserved cut buckle hanging on the five sides of the furnace (both sides of the furnace, furnace door, back wall, bottom), each wire heating rod is fixed to the furnace wall with ceramic rods at both ends to prevent the resistance wire from shrinking when used at high temperature. |
| Thermal field control method: | Low-temperature hot air circulation, high-temperature five-sided heating radiation automatic switching. |
| Debinding stage | According to the pre-set program, the debinding port and fresh air supply are automatically opened, the fresh air preheating system is started, and the preheated fresh air slowly enters the furnace through the pre-set air volume of each temperature stage to realize hot air circulation. A large amount of gas exchange will promptly discharge the organic compounds generated by debinding out of the furnace. |
| Gas system | There are air inlets in the furnace for air to enter and circulate, and exhaust holes on the top for harmful gases to be discharged. |
| Exhaust gas treatment device | The debinding furnace is equipped with an exhaust gas treatment device, which uses resistance wire heating to decompose harmful gases and is equipped with an exhaust fan to discharge combustion gases. |
| Temperature controller | Adopting European instruments, multiple multi-stage programs can be set, with high temperature control accuracy,SSR control, PID parameter self-tuning function; program temperature rise, program heat preservation, program cooling |
|
Standard Accessories Thermal gloves | Crucible Tongs | Thermocouple | Furnace Door Block | User Manual |Tools | |
||||
| Certification: CE, ISO, SGS ect, more than 30 patent certifications | ||||
| Warranty: One-year warranty (excluding wearing parts) and long-term technical support |
Product details
Product Application
Be used in a wide range of Programmable muffle furnace
Laboratory
Metal
Ceramic
Electronics
Chemical
Glass
Company introduction
Debinding and sintering furnace is a professional equipment for heat treatment. Many new equipment, new technologies and new functions in the world need us to research and develop. The high temperature heat treatment electric furnace produced by our company exists for this purpose. This is a great project loved by both at home and abroad.
Professional team
29,000+ experts worldwide
Senior project managers effectively control all aspects of the project
7x24 hours delivery
Located in 27 cities around the world,with 50 delivery centers,providing 200+ languages,7x24 hours delivery capacity,is the best partner for enterprise globalization
834M
Total Freelancer
732M
Positive Review
90M
Order recieved
236M
Projects Completed
Certification
Honor and qualification
Official certification, professional after sales service.
CE
CE
CE
ISO9001
SGS
FAQ
Q: Are you Debinding and sintering furnace manufacturer?
Q: What kind terms of payment can be accepted?
Q: Can l ask for customized furnace?
Q: What about the delivery time?
Q: What about the guarantee period?
Q: What about the Minimum Order Quantity?
Hot Tags: debinding and sintering furnace, China debinding and sintering furnace manufacturers, suppliers
