Lab Biomass Pyrolysis Furnace

The laboratory biomass cracking with condensate collector is a high-temperature laboratory furnace, which adopts a double carbon steel shell and 30 stage PID control. Composed of high-purity alumina polycrystalline fiberboard and high-quality heating elements. This stove is equipped with an air cooling system to rapidly cool and raise the temperature.
It is a specialized equipment developed for sintering and melting analysis of metal, non-metal, and other composite materials in universities, research institutes, and industrial and mining enterprise laboratories.

● Different temperature range optional;

● PID automatic control and auto-tune function.

● Intelligently programmable controller, Set program freely;

● Different chamber size can be customized.

● A variety of exhaust gas treatment methods are available; 

Door block 1set, vacuum pump 1pc, crucible tongs 1pc, Thermal gloves 1 pair, Operation manual 1pc,Condensation collector 1 set.

1. After the stove is used for the first time or not used for a long time, it should be baked at about 120°C for 1 hour and at about 300°C for 2 hours before use, so as not to cause cracking in the furnace.

2. The furnace temperature is low at first, a large amount of heat absorption is required, so the heating rate of the low temperature section should not be too fast, and the difference between the heating rates of each stage should not be too large, and the physical and chemical properties of the sintered material should be fully considered when setting the heating rate, so as to avoid the phenomenon of spraying materials and polluting the furnace.

3. The heating element of silicon-molybdenum rod should not be operated for a long time in the temperature range of 400-700°C, otherwise low-temperature oxidation will occur and the service life will be affected.

4. The furnace temperature should not exceed the rated temperature to avoid damage to the heating element and the furnace lining.

5. The cooling rate should not exceed 10°C/min, and refractory blocks must be inserted before closing the door.

6. In order not to affect the service life of the instrument, it is recommended to raise the temperature at 10°C/min

7. The furnace door can only be opened after the temperature in the furnace becomes normal temperature, the sample temperature may still be high at this time, please pay attention to wear high-temperature gloves for operation;

8. It is normal for small cracks to appear on the surface of the refractory after long-term use.

9. This chamber furnace has no vacuum sealing, and cannot be passed into flammable, explosive, toxic and corrosive gases;

Laboratory Crucible Furnaces

Flange door with inlet /outlet gas port, Good sealing for vacuum 

Reasonable Layout Control Panel, Easy To Use And Operate

High quality heat resistant fire blocking bricks

High quality 310ss crucible chamber

Laboratory crucible furnaces are widely used in scientific research and small batch production in industrial and mining enterprises, as well as in ceramics, metallurgy, electronics, glass, chemical industry, machinery, refractory materials, new material development, special materials, building materials, sintering, etc. involved in scientific research and teaching in universities and colleges, such as sintering, annealing, tempering, quenching and other processes.

Be used in a wide range of Laboratory Crucible Furnaces

 

Laboratory

Metal

Ceramic

Electronics

Chemical

Glass

Nanyang Xinyu New Material Technology Co.ltd

Xinyu Technology established its own brand and status with strong professional skills and rich experience in services. All of production was controlled by ISO9001: 2015 quality system, and passed through the EU CE certification, which populated all around the world, including the United States, Canada, Mexico, Brazil, Chile, Japan, Thailand, India, Myanmar, Singapore, Malaysia, Pakistan, Iraq, Yemen, Saudi Arabia, Israel, Germany, the United Kingdom more than 30 countries and regions.

Professional team

20+ experts and Senior managers effectively control all aspects of the project

Rich experience in heat treatment industry

More 15+ years experience in heat treatment industry, can make various of customized high temperature ! 

 

Honor and qualification

 

 

Official certification, professional after sales service.

CE

CE

CE

ISO9001

SGS

Hot Tags: lab biomass pyrolysis furnace, China lab biomass pyrolysis furnace manufacturers, suppliers