Three zone furnace
This Three zone furnace uses resistance wire as the heating element, adopts double shell structure and 50 section program temperature control system, phase shifting trigger and silicon controlled. The furnace is made of alumina polycrystalline fiber material, which has the advantages of balanced temperature field, low surface temperature, fast temperature rise and fall rate, energy conservation, etc. It is an ideal product for universities, research institutes, industrial and mining enterprises to do high-temperature atmosphere sintering, atmosphere reduction, CVD experiment, and vacuum annealing.
|
Model |
SK3Z-6-12TPD2 |
|
Dimensions: Standard Heating zone length (mm) |
205mm+205+205mm |
|
Dimensions: Standard Tube diameter (mm) |
∮100mm |
|
Max.temperature |
1200℃, Continuous working temperature 1100℃. |
|
Voltage(V) |
110 or 220 1P |
|
Thermocouple type |
K (1200℃) |
|
Heating element |
HRE Alloy resistance wire(1200℃) |
|
Temp.Precision |
±1℃ |
|
Heating rate |
0-30℃/min free adjustment |
|
Chamber material |
Using advanced high-quality alumina microcrystalline fiber material |
|
Furnace structure |
Double-layer air-cooled structure, surface temperature is less than 60℃ Two heating zone of the furnace, can independently control each temperature zone. |
|
Temperature controller |
Intelligent PID temperature control instrument, 30 or 50 program segments, No need to be on duty, stop on your own after the heating and cooling have ended. |
|
Inlet gas/Atmosphere |
It can be filled with various protective or destructive gases, Inert gases, mixed gases, nitrogen, oxygen, etc |
|
Gas control |
The air inlet can be set up 1 or more air intakes, each air inlet is provided with a needle valve, connected with a vacuum gauge. The air outlet is connected with one air outlet, and all holes are equipped with needle valves. Equipped with a vacuum pump. |
|
Vacuum system |
-0.1Mpa Single pole rotary vane pump. Optional options include bipolar rotary vane pumps, diffusion pumps, molecular pumps, etc.
|
|
WELCOME OEM/ODM |
|
Standard Accessories
Thermal gloves | Crucible hook | Thermocouple | Tube Block | User Manual |Tools | Vacuum pump| Quartz or Alumina tube |Flange |Sealing ring |10mm gas hose |Flange support | heater
Optional
Different heating zone for your choose;
LCD touch screen control for choose.
RS485/USB port to connect computer for choose.
High vacuum as you need.(10Pa,10-1Pa,10-2Pa,10-3Pa)
Two or three flowmeter as you need.
Detail picture
Application
Three zone furnace are widely used in scientific research and small-scale production in industrial and mining enterprises. Each temperature zone can be individually controlled, and different heating and cooling rates can be set. Different materials can be placed in each temperature zone, achieving dual use of one machine. Widely used in ceramics, metallurgical sintering, tempering, annealing, etc.
Warm Tips
1. The air pressure in the furnace tube shall not be higher than 0.02MPa
2. Since the internal air pressure of the gas cylinder is high, the pressure reducing valve must be installed on the gas cylinder when the gas is fed into the furnace tube. To ensure safety, it is recommended to use a pressure lower than 0.02MPa
3. When the furnace body temperature is higher than 1000 ℃, the furnace tube shall not be in a vacuum state, and the pressure in the furnace tube shall be equivalent to the atmospheric pressure
4. The gas flow into the furnace tube shall be less than 200SCCM to avoid the impact of cold air flow on the hot furnace tube
5. For the sample heating experiment, it is not recommended to close the air extraction valve and air inlet valve at the flange end of the furnace tube. If it is necessary to close the gas valve to heat the sample, pay attention to the indication of the pressure gauge at all times. If the air pressure indication is greater than 0.02MPa, the exhaust valve must be opened immediately to prevent accidents (such as furnace tube rupture, flange flying out, etc.)
Nanyang Xinyu New Material Technology Co.,ltd.
We are a professional manufacturer of laboratory high temperature systems since 2005. We have two factory all located in Nanyang city of comprehensive bonded zone,one is main produce equipment shell and electric parts, another for assembly and testing all equipment.
We have experienced R&D team with 10 more skilled engineers.
Our main products such as: Muffle Furnace,Tube Furnace,Atmosphere furnace,Vacuum Furnace,Bottom loading Furnace,Car bottom furnace,Degreasing sintering furnace, Vacuum brazing furnace,drying oven and Various high temperature accessories,etc.
Welcome OEM,ODM!
01
High Quality
Comprehensive factory strength, supporting customization of various high-temperature equipment, with all required production capabilities for research and development, design, production, etc.
02
Advanced Equipment
Our main products such as: Muffle furnace,Tube Furnace,Atmosphere furnace,Vacuum Furnace,etc.
03
Professional Team
We have experienced R&D team with 10 more skilled engineers.
We also have two factory main for high temperature Lab equpiment.
04
Custom Service
12 Months warranty.
Respond to all after-sales issues within 24 hours.
Lifetime technical support.
sHOW OF OUR FACTORY &EXHIBITION
NANYANG XINYU NEW MATERIAL TECHNOLOGY CO.,LTD
G2 Building
Two zone Tube Furnace Working PROCESS
Detail of Packing
Exhibition in USA,Mexico
Our Certificate
CE
CE
CE
ISO
If you are interested in Two Zone Tube Furnace, you can contact us through the following methods and we will reply to your inquiry as soon as possible.
Our address
Nanyang City, Henan Province, P.R. China
Phone Number
(377)-6353-3899
sales@nyxinyu.com
Hot Tags: three zone furnace, China three zone furnace manufacturers, suppliers
