Nanyang XinYu New Material Technology Co.,Ltd
Add: No.1 Rd, photoelectric industry gathering area, Wolong district, NanYang, HeNan, China.
Tel: 86-0377-63533899 Fax:86-0377-63533799
Email: sales@nyxinyu.com gary@nyxinyu.cn
Nanyang XinYu New Material Technology Co.,Ltd
Add: No.1 Rd, photoelectric industry gathering area, Wolong district, NanYang, HeNan, China.
Tel: 86-0377-63533899 Fax:86-0377-63533799
Email: sales@nyxinyu.com gary@nyxinyu.cn
Argon Atmosphere sintering furnace can protect materials from oxidation and decarburization with flowing Nitrogen,Argon and other inert gas.It’s widely used in labs of university,metals,ceramic sintering and melted, the small steel etc heating, roasting, heat treatment.
Can be customized according to your needs.
Based on the above information,you can choose according to the Atmosphere furnace image and the table parameters in detail, and then contact us to get the price you expect.
Max.temp. Up To 1700℃
Excellent heat-insulation effect,symmetrical temperature uniform
Good sealing to make sure no leakage
Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina fiber ceramic insulation.
Heavy duty double layer structure with cooling fan. Lower temperature in outside case.
PID automatic control via current limiting phase angle fired the resistor, e.g. SCR(Silicon Controlled Rectifier).
Power control with mutli segments programmable.
Furnace Door Block | Crucible tongs | Protective gloves | thermocouple | Vacuum Gauge | User Manual
Vacuum pump | extra heating elements | extra thermocouple | touch screen controller | 2-5 gas channels system |
Paperless recorder | Remote communication control system
Content may be subject to modifications or corrections
Argon CoCr Atmosphere Sintering Furnace specification :
Rated Voltage & Power: | AC 110V/220V/380V 50/60Hz |
Inner Chamber Size: | 100x100x100mm, 200x150x150mm, D300xW200xH200mm, 400x300x300mm or bigger optional; |
Max. Temperature: | 1200.C / 1400.C / 1700.C ; |
Continuous Working Temperature: | 1100.C / 1300.C / 1600.C Max. |
Max. Heating Rate: | 0-30 °C /min,Suggest 10.C/min (under 1400.C);5.C/min (1400.C-1600.C) ; 2.C/min (>1600.C); Note: The lower the heating rate, the longer the life of the heating element. |
Temperature Controller: | PID automatic control and auto-tune function. |
Temperature Accuracy: | +/- 1 .C. |
Heating Element: | Electric resistance wire / SiC heater / MoSi2 heater . |
Thermocouple : | K / S / B type (Depend on the temp. ) |
Max. vacuum: | -0.1 Mpa. |
Atmosphere: | Helium (He), Neon(Ne), Argon(Ar), Krypton(Kr), Xenon(Xe), Radon(Rn), Oxygen(O2),Nitrogen (N2), Hydrogen(H2) . |
Gas mixing system (Optionals ) | 2/3/4/5 Float flowmeter gas control/MFC gas control system; With One mixing tank; flowmeter range: 0.03-0.3SLM,10-100SCCM,16-160ml/min,25-250cc/min optional; For precision gas control, you can choose digital mass flow Control system instaed of float-meter. SCCM 0~5,10,20,30,50,100,200,500 SLM 0~1, 2, 3, 5, 10,15, 20, 30 |
Standard Parts: | Crucible tongs 1pc, high temperature gloves 1 pair, one user manual. |
Optional parts: | PLC touch screen controller, paperless recorder,Remote communication control system, 2-3 gas channels mixing system desktop,Open the door Power off function. |
Warranty: One year limited warranty with lifetime support, excluding heating element,cooling fans, thermocouple and ceramic tube damaged by user.
Attention: Any damages caused by the use of corrosive and acidic gases, and any damage from wrong operate and use are not under the coverage of One Year Limited Warranty.
1700 Degree Atmosphere Sintering Furnace Using Precautions:
1. The MoSi2 heating element must not be used at low temperatures (400.C-700.C) for a long
time, otherwise the heating element may be damaged.
2. In order not to affect the service life of the instrument, we recommend the heating rate <10°C/min and cooling rate < 5°C/min.
3. The box furnace does not use vacuum sealing structure, so can not inlet flammable or explosive gas.
4. After using the furnace a certain period, there will be minor cracks in the
hearth/chamber. This is a normal phenomenon and will not affect the use.
At the same time, it can be repaired with an alumina coating.
5. Door block/Firebricks must be inserted before closing the furnace door.
© Copyright 2010-2023 XINYU TECHNOLOGY CO., LTD. All right reserved